05-Oct-2022
0200668402
I have read and understood the disclaimer below
and wish to download the designated software
Software that converts images captured by the EOS VR SYSTEM into 180°VR images in equirectangular projection that can be viewed and edited in a VR environment.
Changes for EOS VR Utility 1.1.3 for Windows :
- Supports Windows 11 2022 Update (22H2).
Required System Configuration:
To use this software, your computer has to meet the following system requirements.
1. Supported OS
- Windows 11, Windows 10 64-bit (Desktop mode only)
2. Supported computers
Computers preinstalled with the OS above (The operation of upgraded computers is not guaranteed)
CPU:
- Intel Xeon, Core i9 / i7 / i5 / i3
RAM:
- 8 GB or more
GPU:
A GPU (VRAM: 4GB or more) that supports CUDA (Compute Capability 3.5 or later) made by NVIDIA.
- Requires driver version 512.59 or later.
- The processing performance should be lower on a computer that has no supporting GPU.
3. Display
- Resolution: 1,920x1,080 or higher
Recommended System Configuration:
To enable 30fps playback of 8K/4K MP4 movies shot with EOS R5/EOS R5 C, the following additional configurations are recommended in addition to the above required system configurations.
* Even if the recommended environment is met, it may not be possible to play smoothly.
CPU:
- Intel Xeon E5-2687W v3 3.1GHz - 2 units or greater
RAM:
- 32GB or more
GPU:
- NVIDIA GeForce RTX 3080
Supported Models
EOS R5 C, EOS R5 (Firmware Ver.1.5.0 or higher)
RF 5.2mm F2.8 L DUAL FISHEYE
- You need to subscribe to a paid plan to use the software. A Canon ID account is required.
Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.
1. Download "vuw-1-1-3-1-10l.zip" from the download page.
2. Extract "vuw-1-1-3-1-10l.zip" on the computer to generate "vuw11.exe".
3. Double-click "vuw11.exe".
4. Follow the on-screen instructions to complete the installation.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.