When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)?
05-Jan-2011
8201017100
Solution
You can activate the relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.
When recording in the built-in memory, you can choose to use only memory card A for relay recording ( 
, or use both memory cards ( 
). When recording on memory card A, you can use memory card B for relay recording ( 
).
, or use both memory cards ( ). When recording on memory card A, you can use memory card B for relay recording ( ). Confirm the following information regarding the relay recording settings.
1. Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.
- When relay recording from the built-in memory: memory card slot
or both memory card slots. - When relay recording from memory card A: memory card slot
only.
NOTE
You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .
.2. Set the mode switch to <M> or <CINEMA>.
3. Turn on the camcorder.
4. Touch [ 
].
].
5. Touch [ MENU ].
6. Touch [ 
].
].
7. 
Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, 
and touch inside the frame on the right.
Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.
8. Touch [ 
] or [ 
].
] or [ ].
9. Touch [Relay Recording].
10. Touch [ ] or [ ].
] or [ ].If [ ] was selected in Step 8, then you can only choose [ ].
] was selected in Step 8, then you can only choose [ ].
11. Touch [ 
] to close the menu.
] to close the menu.NOTE
- There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.
- Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder’s operating mode.
- Changing the memory used for recording movies.