The effects of [High ISO speed noise reduction] on the number of possible shots for the maximum burst during continuous shooting (EOS M)
11-Dec-2015
8202643000
Solution
If the maximum burst is lower than the normal number, and the camera stops continuous shooting in mid-course, check the [High ISO Speed Noise Reduction] custom function setting.
If [High ISO Speed Noise Reduction] is set to [High] or [Multi Shot Noise Reduction], the number of continuous shots (maximum burst) will be lower. To reset the maximum burst to normal, select either [Standard], [Low], or [Disable] for [High ISO Speed Noise Reduction].
IMPORTANT
When the [High ISO speed noise reduction] setting is enabled, more time is required to process noise reduction. As a result, it will take longer to temporarily save data in the storage space, and the camera is more likely to be interrupted during continuous shooting.
1. To change the [High ISO Speed Noise Reduction] setting, display the menu screen and choose [High ISO speed NR] on the [ 
] tab, then press < 
>.
] tab, then press < >.
2. The [High ISO speed NR] screen will appear, select either [Standard], [Low], or [Disable] for [High ISO Speed Noise Reduction].
For more information, please refer to the camera's instruction manual.
