Setting the Slow & Fast Motion Recording
10-Apr-2019
8204450100
Solution
IMPORTANT
The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.
You can record clips that have a slow motion or fast motion effect during playback, simply by selecting the desired slow / fast motion rate. Available slow / fast motion rates will vary depending on the resolution and frame rate currently selected. Sound is not recorded when slow & fast motion recording is activated.
1. Set the power switch to CAMERA.
2. Press the MENU button.
3. Select [ 
Recording Setup ] -> [Slow & Fast Motion].
Recording Setup ] -> [Slow & Fast Motion].4. Select the desired slow & fast motion rate.
5. Select [ 
].
].REFERENCE
- Select [
] to turn off slow & fast motion recording. -
or 
and the selected rate will appear on the right of the the screen.
- MP4 clips: Available slow/fast motion rates
| Resolution | Frame rate | Available slow/fast motion rates |
| 3840x2160 | 25.00P | x2, x4, x10, x20, x60, x120, x600, x1200 |
| 1920x1080 | 50.00P | x2, x4, x10, x20, x60, x120, x600, x1200 |
| 25.00P | x0.5 |
- XF-AVC clips: Available slow/fast motion rates (
and 
only)
| Resolution | Frame rate | Available slow/fast motion rates | Playback bit rate |
| 3840x2160 | 25.00P | x2, x4, x10, x20, x60, x120, x600, x1200 | 160 Mbps |
| 1920x1080 | 50.00P | x2, x4, x10, x20, x60, x120, x600, x1200 | 45 Mbps |
| 25.00P | x0.5 |
NOTE
- Slow & fast motion recording cannot be used together with the following functions.
- Dual recording
- Relay recording
- Pre-recording
- Color bars
- While slow & fast motion recording is activated, the recording command signal will not be output from the SDI OUT terminal ( only) or HDMI OUT terminal.
- About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [ 
Regen.], or to [ 
Preset ] with [ 
Rec Run ] running mode.
Regen.], or to [ Preset ] with [ Rec Run ] running mode. - If the time code running mode was set to [ 
Free Run ], the time code running mode will be changed automatically to [ Rec Run ] when slow & fast motion recording is activated.
Free Run ], the time code running mode will be changed automatically to [ Rec Run ] when slow & fast motion recording is activated. - When slow & fast motion recording is turned off, the time code running mode will return to its previous setting.
- The time code signal cannot be output from the SDI OUT terminal ( only) or HDMI OUT terminal.
only) or HDMI OUT terminal.- The maximum continuous recording time of a single clip using slow motion recording is the equivalent of 6 hours of playback time. Recording will stop automatically after that. For example, when the [x0.5] rate is selected, the maximum continuous recording time will be 3 hours (which, played back at x0.5 slow motion, equal 6 hours of playback time). This restriction does not apply to fast motion recording, which will not stop automatically.