Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF6300S)

Last Updated : 16-Mar-2011
Issue Number : 8201112100

Solution

If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing [Adj.Fine Feed] during printing to fine-tune the feed amount.

NOTE

Always execute [Adj.Quality] before [Adj.Fine Feed].

Once you execute [Adj.Quality], the [Adj.Fine Feed] value will revert to 0.

　-> Automatic Banding Adjustment (Adj. Quality) (iPF6300S)

　-> Manual Banding Adjustment (Adj. Quality) (iPF6300S)

Perform adjustment as follows.

1.On the [Tab Selection screen] of the Control Panel, press

or

to select the Settings/Adj. tab (

).

NOTE

If the [Tab Selection screen] is not displayed, press the [Menu] button.

2.Press the [OK] button.

The [Set./Adj. Menu] is displayed.

3.Press

or

to select [Adj. Fine Feed], and then press the [OK] button.

4.Press

or

to select a setting value in the range -5 to +5, and then press the [OK] button.

The setting is now applied.