22-Jul-2015
0100463401
I have read and understood the disclaimer below
and wish to download the designated software
This file is a driver for Canon IJ multifunction printers.
IJ Network Tool is included in this MP Drivers.
[Ver. 1.06]
- Windows 10 has been added as a supported OS.
- Windows 8.1 has been added as a supported OS.
- Windows 8 has been added as a supported OS.
[Ver. 1.05]
IJ Scan Utility:
- The operation of the printer's communication timer is optimized on the printer driver.
[Ver. 1.04]
Printer Driver:
- When cancelling the print job in collated printing multiple numbers of copies, the print job may not be deleted.
Scanner Driver:
- The problem that an error may occur at the MP Driver installation in rare cases has been rectified.
[Ver.1.03]
Scanner Driver:
The problem that scanning cannot be performed properly in some of the application software has been rectified.
[Ver.1.02]
- Officially supports Windows 7.
Scanner Driver:
- The problem that color matching cannot be performed properly has been rectified.
[Ver. 1.01]
Scanner Driver:
- The following problem has been rectified:
When scanning after loading and thumbnailing the name card / photo data, the edge of the scanned image may not be scanned.
- The following problem has been rectified:
The interface information may not be properly displayed in the Scanning Information dialog.
- The following problem has been rectified:
When scanning multiple crops with the Preview window without using a thumbnail view, an error may occur.
- The following problem has been rectified:
When creating a crop with a specific size using a thumbnail view, an error occurs.
- (For Norwegian and Czech)
The following problem has been rectified:
When scanning at the volume upper limit or above using a thumbnail view, an error message is displayed.
- The following problem has been rectified:
When the Preview window is displayed without using a thumbnail view, the cropping frame size can be changed without putting the cursor over the cropping frame.
- The following problem has been rectified:
Even when specifying the output size as 21000 x 30000pxl or lower, the warning message telling that the output size is beyond the bounds of permissibility may be displayed.
Windows 10 (32bit)
Windows 10 (64bit)
Windows 8.1(32bit)
Windows 8.1(64bit)
Windows 8(32bit)
Windows 8(64bit)
Windows 7(32bit)
Windows 7(64bit)
Windows Vista(32bit)
Windows Vista(64bit)
Windows XP SP2 or later
Printer Driver:
1.[Windows 10]
Some of the settings (such as borderless printing) in the OS standard print settings screen are not valid. the settings in the Printer printing Preferences window are valid. Make settings in Printer printing Preferences when necessary.
2.[Windows 10]
Layout printing from the OS standard print settings screen may not be performed as expected in Some instances.
In such cases, open the Printer Printing Preferences window and change the paper size accordingly.
3.With Internet Explorer 11, a web site containing Japanese may not be printed properly.
In Windows Update, update the OS and Internet Explorer to the latest version.
Scanner Driver:
1.If the OS is upgraded with the scanner driver remained installed, scanning by pressing the SCAN button on the Printer may not be performed After the upgrade. in such cases, re-install the scanner driver.
2.While scanning, the computer goes into the sleep status if OS setting is set to do so. Scanning stops in the Sleep status.
(Preventive action)
To scan the data with high resolution and large capacity, specify the enough time to complete the scanning or disable the setting.
IJ Network Tool:
1.In the environment where the Firewall software operates, as the printer detection using LAN communication is inhibited, the setup may not be competed.
(Preventive action)
Disable the Firewall setting temporarily, or close the Firewall software, then, perform the setup. In each case, disconnect the network from the Internet first.
2.When using of IJ Network Tool under Windows Vista 64bit version, the following message may be displayed at the setup:New Port could not be created.
(Preventive action)
Cancel the setup once, then retry the setup after restarting the computer.
Download / Installation Procedures
1. Click the link, select [ Save ], specify "Save As", then click [ Save ] to download the file.
Memo :
If you select [ Run ] ( or [ Open ] ) instead of [ Save ], the file will be automatically installed after it is saved.
2. The downloaded file will be saved in the specified place in the self-extracting form ( .exe format ).
3. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
Uninstall Procedures
If needed, you can uninstall this program using the Control Panel.
Note :
The steps below are for Windows 7. This procedure may be different for other OSes.
1. On the Start menu, click Control Panel, and then, under Programs click Uninstall a Program.
2. A page will open with a list of installed programs. Double click on the program that you want to uninstall.
3. Click "Yes" then "OK", this will complete the uninstallation process.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.