01-Apr-2021
0200566402
I have read and understood the disclaimer below
and wish to download the designated software
imagePROGRAF Direct Print & Share is software that allows you to directly print files without opening them and to share files via cloud storage.
[Ver.2.7.0a]
- The supported models have been added.
[Ver.2.6.0]
- Registering unsupported sized file by the driver became available.
- AutoCAD 2020 became supported. (64-bit OS only)
- The supported models have been added.
[Ver.2.5.0]
- The supported models have been added.
[Ver.2.4.0]
- Status Monitor became able to be started up automatically, which made it easier to check printer status.
- Displaying registered files in thumbnail became possible.
- Saving print settings became possible.
- Inserting blank pages became possible so that the job end is easy to be found.
- Keeping print history remained became possible, which made it easier to print in the same settings.
- Enlarging the main screen to the maximum size became possible, which made it easy to check preview.
- AutoCAD 2019 has been supported.
- The supported models have been added.
- Windows 8 became unsupported.
[Ver.2.3.0]
- The supported models have been added.
- Change the supported application. For details, refer to the information given in the contents.
- When selecting [Monochrome] in [Color Mode], preview is displayed in black and white.
[Ver.2.2.0]
- When uploading or downloading a poster file in PosterArtist with using cloud, the actual image of the poster is able to be confirmed in preview.
- When selecting other than [Match Page Size] in [Paper Size:], magnification or reduction is operated automatically.
- The supported models have been added.
[Ver.2.1.0]
1.Access method to "Google Drive" was changed.
2.AutoCAD2015 has been supported.
3.Part of installation function was modified.
[Ver.2.0.1]
1.An additional function that you can print files without displaying the Direct Print & Share screen by creating a shortcut print icon and dropping the files onto the shortcut print icon.
2.An additional function that you can force to process a file as HP-GL/2 by selecting and right-clicking a file and then selecting the Process in HP-GL/2 format check box.
The following hardware and software are recommended for this software.
OS:
Windows 10(32bit)
Windows 8.1(32bit)
Windows 7 SP1 or later(32bit)
(Note)
- For the Windows OS, use the latest version of Service Pack.
Hardware:
Any computer running the software listed above.
Printer Driver:
Canon imagePROGRAF Printer Driver V4.43 or later
Supported Cloud Service:
Google Drive
Versions of AutoCAD Supported by the AutoCAD plug-in:
AutoCAD 2008 to 2019 (32-bit)
Precautions During Installation
- Administrative privileges are required for the installation.
- Before performing the installation, close all the other application software.
- If a document is currently being printed out, then wait until printing ends or quit that application.
Note the following limitations when using this software.
- The cloud service might not be available depending on the country or region where you are using this software.
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.