23-Jul-2013
0400089602
I have read and understood the disclaimer below
and wish to download the designated software
Details:
Firmware Version 1.2.3 for the Canon EOS-1Ds Mark III camera incorporates the following fixes:
1. Resolves the following phenomenon: when the camera is not attached to a lens, power consumption may be higher than usual, causing premature battery drain.
2. Resolves a phenomenon in which "Err 70" may be displayed when the shutter is released without a lens attached.
Firmware Version 1.2.3 is for EOS-1Ds Mark III cameras with firmware version 1.2.2 or earlier. If your camera's firmware is already Version 1.2.3, it is not necessary to update the firmware. Before updating your camera's firmware, please review the instructions thoroughly.
Preparations for the Firmware Update:
Macintosh
After the downloaded compressed file (.dmg file) is extracted, a firmware folder is created.
* Extracting the downloaded file:
The downloaded folder is automatically extracted, and a firmware folder is created. If the download folder cannot be automatically extracted, double-click the folder.
The extracted folder contains the firmware (file name: 1DS30123.FIR / file size: 10,533,852 bytes) and instructions on the firmware update procedures (a PDF file in two languages: English and Japanese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
(Revision History)
Q: Are the previous versions of firmware included in version 1.2.3?
A: Yes, the following improvements from the previous versions are included.
Changes in Version 1.2.2
1. Enables the center AF point to autofocus when the camera is used with the EF 200-400mm f/4L IS USM Extender 1.4X lens and an Extender, whose combined maximum aperture is f/8.
Changes in Version 1.2.0
1. It has become compatibleEnables compatibility with Wireless File Transmitter WFT-E2 II, which was released in late December, 2009.
* Changes from previous versions (Ver. 1.2.0 or before) are included.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.