Canon Digital Cinema Camera EOS R5 C Firmware Version 1.0.7.1 [macOS]

    11-Jul-2024
    0400972802

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • macOS 14
    • macOS 13
    • macOS 12
    • macOS 11
    • macOS 10.15
    • macOS 10.14

    Detail

    Firmware Version 1.0.7.1 incorporates the following enhancements and fixes:
    1. Adds the following size option to the Focus Guide function:
    -Normal/Large
    2. Enables the display of Markers during playback.
    3. Enables the following functions to be assigned as options to the Select Dial:
    -Iris
    -Shutter
    -ISO/Gain
    -White Balance Mode
    -White Balance Mode (K)
    -White Balance Mode (CC)
    -Select Subject
    4. Enables the Shutter Speed option to be assigned to the Top Grip control dial, the Top control dial, and Control Ring.
    5. Enables the AF frame position to be reset by pushing the Joystick. (Video Mode)
    6. Adds the following thickness option to the Continuous AF frame:
    -Normal/Slightly Thick/Thick.
    7. Adds supports for the lens correction function that is included with EOS VR Utility Version 1.4 or later.
    8. Fixes minor issues.

    For further information, please refer to the latest version of the camera's Instruction Manual that is released with the firmware update.

    Caution:
    - Please use an SD/SDHC/SDXC memory card that is 512MB or greater to perform the firmware update.
    - Firmware version 1.0.7.1 is for updating EOS R5 C cameras running firmware version 1.0.0.1 - 1.0.6.1. If your camera's firmware is already version 1.0.7.1, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
    - Please refrain from loading menu settings generated using the most recent firmware version to a product running an old firmware version, as doing so may affect camera operations.
    - Firmware update must be performed in VIDEO mode.

    Preparations for a firmware update:
    - After the firmware update has been performed, the camera's menu settings will be reset. It is recommended that, prior to starting update operations, users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings."
    - The downloaded folder contains the firmware (file name: VSD11.FIR / file size: 92,444,848 byte), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Prior to starting the firmware update operations, please be sure to carefully review and confirm your understanding of these instructions.

    Regarding the Software Included in this Firmware:
    The software included in this firmware is comprised of software modules developed by both Canon and third parties.

    Software Developed by Canon and Free Software:
    Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
    This product uses software modules under copyright by third parties and distributed as free software.

    Display of License Information of Free Software Modules Included in this Firmware:
    The license information required to be displayed for the free software modules included with this firmware is saved in the download file. To check the free software module licenses, please refer to the "EOS R5C OSS Info.pdf".

    Obtaining Source Codes of Free Software:
    Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please refer to the "EOS R5C OSS Info.pdf".

    The following items are required to perform this firmware update:
    1. Camera Body EOS R5 C
    2. A computer
    3. SD/SDHC/SDXC memory card with a capacity of 512MB or greater (commercially available)
    4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
    5. A fully charged battery pack for the camera, or a dedicated AC adapter kit (optional)
    6. The firmware (the downloaded file)

    History:
    Firmware Version 1.0.6.1
    1. The following features are enabled when the following lens is attached: CN-E31.5-95mm T1.7 L S
    - Displaying metadata, such as the model name and the focal distance of the lens attached.
    - Displaying T number.
    - Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
    - Support for [Dual Pixel Focus Guide].
    2. Adds support for the following RF-Mount Cinema Prime Lenses:
    CN-R14mm T3.1 L F
    CN-R20mm T1.5 L F
    CN-R24mm T1.5 L F
    CN-R35mm T1.5 L F
    CN-R50mm T1.3 L F
    CN-R85mm T1.3 L F
    CN-R135mm T2.2 L F
    3. The following features are enabled when the following lens is attached: RF24-105mm F2.8L IS USM Z
    - Support for aperture ring adjustment.
    - Support for zoom operations.
    9. Adds support for the Power Zoom Adapter PZ-E2.
    10. Adds [_Proxy] option in XF-AVC proxy media name.
    11. Improves vector scope.
    - Changes to display [BT.2020] in the frame when the color space is set to BT.2020.
    - Changes to always display the target color name.
    12. Adds Tally OSD menu display option. This new feature adds a highlighted boarder to the OSD signal during recording

    Firmware Version 1.0.5.1
    1.The following features are enabled when the following lenses are attached: CN-E14-35mm T1.7 L S, CN-E20-50mm T2.4 L F, CN-E45-135mm T2.4 L F, CN8×15 IAS S/E1,:
    - Displaying metadata, such as the model name and the focal distance of the lens attached.
    - Displaying T number.
    - Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
    - Support for Dual Pixel CMOS AF autofocus (CN8×15 IAS S/E1 only)
    - Support for [Dual Pixel Focus Guide].
    2.The following features are enabled when the following lenses are attached: RF-S18-45mm F4.5-6.3 IS STM, RF-S18-150mm F3.5-6.3 IS STM:
    - Adds a menu to switch lens functions. (Focus Ring, Control Ring, Lens Optical Image Stabilization)
    3.Adds EF lenses compatible with EF-EOS R 0.71x Mount Adapter.
    CN-E14mm T3.1 L F
    CN-E20mm T1.5 L F
    CN-E24mm T1.5 L F
    CN-E35mm T1.5 L F
    CN-E50mm T1.3 L F
    CN-E85mm T1.3 L F
    CN-E135mm T2.2 L F
    EF14mm f/2.8LⅡUSM
    EF24mm f/1.4LⅡUSM
    EF35mm f/1.4LⅡUSM
    EF50mm f/1.2L USM
    EF85mm f/1.2LⅡUSM
    EF135mm f/2L USM
    4.Enables left/right switching with one touch when using Magnify. (When recording 8K RAW with VR lens attached.)
    5.Enables magnify during 8K MP4 recording. (Not available when HDMI 4K is output.)
    6.Improves switching time between Video/Photo mode.
    7.Adds Power Saving Mode.
    8.Enhances Clear Scan resolution.
    9.Adds Digital-Teleconverter function. (1.5x /2x /2.5x /3x)
    10.Enables to change WFM size.
    11.Enables to change Vector scope gain by touch.
    12.Enables to change WFM/Vector scope opacity.
    13.Improves AF performance.
    - Enables tracking frame to change variably depending on subject.
    - Enables to detect heads facing sideways or backwards, or in situations such as when wearing a helmet.
    - Enables to select Face via control ring/dial.
    14.Adds [Subject Selection] assignable function via control ring/dial.
    15.Adds [Canon 709 / BT.709] to the Gamma/Color Space in Custom Picture setting.
    16.Adds [CMT 709] in Proxy Rec Color Conversion.
    17.Adds [CMT 709] in View Assist.
    18.Adds [G Gain] in White Balance in Custom Picture settings.
    19.Adds support for 4CH display in audio meter.
    20. Fixes an issue in which the camera is unable to shoot properly under certain conditions in still image mode after having updated the camera firmware to Version 1.0.4.1.

    Firmware Version 1.0.4.1
    1. The following features are enabled when the following lenses are attached: CN-E14-35mm T1.7 L S, CN-E20-50mm T2.4 L F, CN-E45-135mm T2.4 L F, CN8x15 IAS S/E1,:
    - Displaying metadata, such as the model name and the focal distance of the lens attached.
    - Displaying T number.
    - Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
    - Support for Dual Pixel CMOS AF autofocus(CN8x15 IAS S/E1 only)
    - Support for [Dual Pixel Focus Guide].
    2. The following features are enabled when the following lenses are attached: RF-S18-45mm F4.5-6.3 IS STM, RF-S18-150mm F3.5-6.3 IS STM:
    - Adds a menu to switch lens functions. (Focus Ring, Control Ring, Lens Optical Image Stabilization)
    3. Adds EF lenses compatible with EF-EOS R 0.71x Mount Adapter.
    CN-E14mm T3.1 L F
    CN-E20mm T1.5 L F
    CN-E24mm T1.5 L F
    CN-E35mm T1.5 L F
    CN-E50mm T1.3 L F
    CN-E85mm T1.3 L F
    CN-E135mm T2.2 L F
    EF14mm f/2.8L II USM
    EF24mm f/1.4L II USM
    EF35mm f/1.4L II USM
    EF50mm f/1.2L USM
    EF85mm f/1.2L II USM
    EF135mm f/2L USM
    4. Enables left/right switching with one touch when using Magnify. (When recording 8K RAW with VR lens attached.)
    5. Enables magnify during 8K MP4 recording. (Not available when HDMI 4K is output.)
    6. Improves switching time between Video/Photo mode.
    7. Adds Power Saving Mode.
    8. Enhances Clear Scan resolution.
    9. Adds Digital-Teleconverter function. (1.5x /2x /2.5x /3x)
    10. Enables to change WFM size.
    11. Enables to change Vector scope gain by touch.
    12. Enables to change WFM/Vector scope opacity.
    13. Improves AF performance.
    - Enables tracking frame to change variably depending on subject.
    - Enables to detect heads facing sideways or backwards, or in situations such as when wearing a helmet.
    - Enables to select Face via control ring/dial.
    14. Adds [Subject Selection] assignable function via control ring/dial.
    15. Adds [Canon 709 / BT.709] to the Gamma/Color Space in Custom Picture setting.
    16. Adds [CMT 709] in Proxy Rec Color Conversion.
    17. Adds [CMT 709] in View Assist.
    18. Adds [G Gain] in White Balance in Custom Picture settings.
    19. Adds support for 4CH display in audio meter.

    Firmware Version 1.0.3.1
    1. Improves the image quality of Canon Log 3 when shooting in XF-AVC or MP4 formats.

    Firmware Version 1.0.2.1
    1. Built-in Mic Audio Off
    The internal microphone on the camera body can now be turned off. (VIDEO mode)
    2. Fixes an issue, in which, in rare instances, the camera cannot be normally operated when operating the REC button with the camera set to the [Continuous Recording] function.(VIDEO mode)
    3. Fixes minor issues when using the CINE-SERVO lens. (VIDEO mode)

    Firmware Version 1.0.1.1
    1. Optimizes AutoFocus accuracy when Extender RF1.4x or Extender RF2x is attached to the RF800mm F5.6 L IS USM and RF1200mm F8 L IS USM lenses. (VIDEO mode/PHOTO mode)
    2. Enhances the stability of Eye Detection.(VIDEO mode/PHOTO mode)
    3. Enhances AutoFocus tracking when shooting moving subjects.(PHOTO mode)

    File information

    1. File name : r5c-v1071-mac.dmg
    2. File version : 1.0.7.1
    3. File type : dmg
    4. File size : 92414KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.