Solution
1. Press [Additional Functions].
2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK].
3. Press [<-] or [+>] to select <NETWORK SETTINGS>, then press [OK].
4. Press [<-] or [+>] to select <VIEW IP ADDRESS>, then press [OK].
5. Press [<-] or [+>] to select <IP ADDRESS>, <SUBNET MASK>, or <GATEWAY ADDRESS>, then press [OK].
If the machine is communicated with the network properly, the IP address, subnet mask, and gateway address are displayed. If not, IP address, subnet mask and gateway address are not displayed. If the machine does not get the IP address 30 seconds after you connect the LAN cable, turn off the main power switch once, and then turn it on again and wait for another 90 seconds. If the machine still does not get the IP address, ask your network administrator.
NOTE
We recommend you to make a note of the IP address you confirmed here, because you need it for
Using the Remote UI.
6. Press [Stop/Reset] to return to the standby mode.
If they are not displayed, that indicates that the machine is not communicated with the network. Please check the setting of IP address.