Using the Remote UI
16-Dec-2011
8100140900
Solution
The Remote UI software enables you to access and manage the machine connected to a network using a web browser.
- Check the machine status from a network computer
- Set and control the machine from a computer
Before using Remote UI, please do the following settings:
1. Press [Additional Functions].
2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK]. If the System Password has been set, enter the System Password using the numeric keys, then press [OK].
3. Press [<-] or [+>] <NETWORK SETTINGS>, then press [OK].
4. Press [<-] or [+>] to select <TCP/IP SETTINGS>, then press [OK].
5. Press [<-] or [+>] to select <USE HTTP>, then press [OK].
6. Press [<-] or [+>] to select <ON> or <OFF>, then press [OK].
- <ON>: Uses the Remote UI.
- <OFF>: Does not use the Remote UI.
7. Press [Stop/Reset] to return to the standby mode.
8. Restart the machine.
NOTE
Before you start the Remote UI, select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator.
The Remote UI screen appears.
- For [Administrator Mode], enter the System Manager password if required.
- For [End-User Mode], enter your user name.
[Device] - [Status] page is displayed when you logon the Remote UI.
A. Displays the current status of the machine, etc.
B. Takes you to the Remote UI top page.
C. Displays the online help for the Remote UI.
D. Displays the current status of print jobs, etc.
E. Takes you back to the top of a current page.
F. Displays a list of settings for the machine, etc.
G. Displays the Address Book data (one-touch speed dialing keys, etc.) registered on the machine.
