How do I add the date and time to my pictures?
13-May-2008
8200076000
Solution
These instructions explain how to insert the date in images.
CAUTION
- To select the items displayed on camera's LCD monitor,
press the button shown below (right, left, up, and down). To specify the selected item, 
press the button.
- The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image.
- When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].
- Screens or menu listings may differ depending on the camera model being used.
1. Set the <Mode Switch> to <Shooting> (
) and then press the <Power> button.
) and then press the <Power> button.
2. Press the <FUNC./SET> (
) button.
) button.
3. A screen like the one below will appear on the monitor.
Select [Date Stamp] (
) in the [Recording Pixels] section .
[Date Stamp] () in the [Recording Pixels] section . 
Press the <DISP.> (
) button.4. A screen like the one below will appear on the monitor.
Press the camera button as shown above (right and left), select [Date Stamp] and set it to [Date] or [Date & Time]. Select the <DISP.> () button.5. Press the <FUNC./SET> (
) button.
) button.
6. A screen like the one below will appear on the monitor, so confirm that [Date Stamp] (
) is set.
) is set.
7. When shooting with this setting, the date will be embedded in the image as shown below.
[Date] [Date & Time]WARNING
The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.