Paper Comes Out Wrinkled
Issue
Paper comes out wrinkled.
Paper comes out wrinkled.
Cause and Solution
Load the paper properly in the paper cassette or manual feed slot. [Loading Paper in the Paper Cassette] [Loading Paper in the Manual Feed Slot]
Replace the paper with new paper in an unopened package. [Usable Paper]
Replace the paper with that which can be used with this printer. [Usable Paper]
Depending on the paper type or the operating environment (especially in a high-humidity or high-temperature environment), the printed paper may come out wrinkled.
<Remedy 1>
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Finishing Details], then click [Advanced Settings] in the [Finishing Details] dialog box.
3. Set [Special Print Mode] to [Special Settings 7].
If this solves the problem, set [Special Print Mode] to [Off].
<Remedy 2>
If the problem is not solved even after applying the Remedy 1, perform the following procedure in the printer driver.
1. Set [Special Print Mode] to [Off].
2. Display the [Paper Source] sheet.
3. Specify [Paper Type] as follows.
* However, the toner may not fix onto paper well, and the printing may come out faint.
- If [Plain Paper] is specified: Specify [Plain Paper L].
- If [Heavy Paper 1] is specified: Specify [Plain Paper].
- If [Heavy Paper 2] is specified: Specify [Heavy Paper 1].
- If [Envelope H] is specified: Specify [Envelope].
- If [Coated Paper 2] is specified: Specify [Coated Paper 1].
- If [Coated Paper 3] is specified: Specify [Coated Paper 2].
- If [Coated Paper 4] is specified: Specify [Coated Paper 3].