Cleaning the Print Head
06-Aug-2008
8200168000
Solution
Clean the Print Head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print Head consumes ink, so clean the Print Head only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on, and load a sheet of A4 or Letter-sized plain paper in the Rear Tray.
2. Open the Paper Output Tray gently, and open the Output Tray Extension.
3. Clean the Print Head.
(1) Press the Menu button.
(2) Select Maintenance, and press the OK button.
(3) Select Cleaning, and press the OK button.
(4) Select Yes, and press the OK button.
The machine starts cleaning the Print Head.
Do not perform any other operations until the machine completes the cleaning of the Print Head. This takes about 1 to 2 minutes.
(5) Select Yes, and press the OK button.
The nozzle check pattern will be printed.
(6) Confirm the displayed message and press the OK button.
4. Examine the nozzle check pattern.
NOTE
- If the problem is not resolved after cleaning the Print Head twice, clean the Print Head deeply. See "Cleaning the Print Head Deeply".