Prepare the Machine
12-May-2008
8200173900
Solution
IMPORTANT
Before turning on the machine, remove all the orange shipping tapes.
1. Unlock the Scanning Unit (Printer Cover).
(1) Open the Document Cover.
(2) Move the Scanner Lock Switch towards the release mark to unlock the Scanning Unit (Printer Cover).
(A) Scanning Unit (Printer Cover)
CAUTION
- Make sure to unlock the Scanning Unit (Printer Cover) before turning on the machine.
- Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark.
2. Plug the power cord in the back of the machine and connect the other end to the wall outlet. Next, open the Sheet Feeder Cover, pull out the Paper Support and the Extension, then open the Paper Output Tray and the Extension.
(B) Paper Output Tray
(C) Extension
(D) Sheet Feeder Cover
(E) Paper Support
(F) Extension
(G) Document Cover
IMPORTANT
- Make sure that the Document Cover is closed.
- Do NOT connect the USB cable at this stage.
3. Open the Operation Panel, then press the ON/OFF button to turn on the machine. The machine will initialize. Wait until the Power lamp stops flashing and remains lit blue.
4. Use the 
or 
button on the Operation Panel to select the language for the LCD, then press the OK button.
or button on the Operation Panel to select the language for the LCD, then press the OK button.(1) Press the or button to select the language.button to select the language.
or button to select the language.button to select the language.(2) Press the OK button.
IMPORTANT
If an unintended language is displayed on the LCD, press the Back button on the Operation Panel to return to the Language selection screen.
Once the message “Install the print head and set the ink tank.” appears, go to 5.
5. Lift the Scanning Unit (Printer Cover) until it locks into place. The Print Head Holder moves to the center.
CAUTION
For your safety, always firmly grip the areas illustrated when lifting the Scanning Unit (Printer Cover).
IMPORTANT
If the Document Cover is opened, you cannot open the Scanning Unit (Printer Cover). Be sure to open the Scanning Unit (Printer Cover) with the Document Cover closed.
6. Write down the serial number located inside the machine. You will need this to register your product.
(H) Serial Number Location
1. Remove the Print Head from its package.
CAUTION
There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items.
2. Remove the orange protective cap from the Print Head and discard it.
(A) Protective Cap
(B) Print Head Nozzles
(C) Electrical Contacts
IMPORTANT
Do not touch the print head nozzles or the electrical contacts.
3. Firmly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever may feel heavy.
4. Insert the Print Head.
(D) Do not touch!
5. Push the Print Head to hold it in place, and lower the Print Head Lock Lever.
IMPORTANT
If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center.
NOTE
For the ink tanks compatible with this machine, refer to the back cover of the Quick Start Guide.
1. Pull the orange tape in the direction of the arrow to peel off the protective film and remove the film completely.
(A) If the air hole is blocked with the remaining film, ink may leak out or may not eject properly.
2. Twist off and discard the orange protective cap located on the bottom of the ink tank.
(B) Do not press!
(C) Electrical Contacts
(D) Ink Port
(E) Protective Cap
IMPORTANT
- Do not touch the electrical contacts.
- Do not touch the ink port.
3. Insert the ink tank into the right-hand slot and press the 
mark on the ink tank until it clicks into place.
mark on the ink tank until it clicks into place.
4. Make sure the ink lamp lights red.
(F) Refer to the color guide on the Print Head Lock Lever.
5. Close the Scanning Unit (Printer Cover).
CAUTION
For your safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover).
IMPORTANT
The machine starts the preparatory operation. It takes about 2 minutes. Do not start another operation until the machine has stopped making operating noises.