Check if the POWER lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the POWER
lamp is off, close the Front Cover and turn the printer on.
While the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing and remains lit green, and then open the Front
Cover again.
An error has occurred on the printer
Close the Front Cover, confirm the number of times the ALARM lamp is
flashing, take the appropriate action to resolve the error, and then reopen it. For
The Front Cover has been left open for 10 minutes or longer
If the Front Cover is left open for more than 10 minutes, the FINE Cartridge
Holder moves to the right to prevent the Print Head from drying out. Close and
reopen the Front Cover to return the FINE Cartridge Holder to the left.
The printer has been printing continuously over a long period
If the printer has been printing continuously for a long time, close the Front
Cover, wait a while, then reopen it.
If the printer has been printing continuously for a long time, the Print Head will
overheat, and the printer stops printing temporarily to protect the Print Head. In
this case, close the Front Cover for a while, then reopen it to move the FINE
Cartridge Holder to the left.
