Placing Originals
16-Dec-2011
8200287300
Solution
Place your originals on the platen glass or into the feeder, depending on the size and type of the original, and the copy modes that you want to use.
Place the originals on the platen glass when copying bound originals (such as books and magazines), heavy or lightweight originals, and transparencies.
1. Lift up the feeder.
2. Place your original face down.
3. Align the original with the appropriate paper size marks.
If your original does not match any of the paper size marks, align the center of your original with the
arrow mark.
4. Gently close the feeder.
The original is ready for scanning.
CAUTION
- When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
- Do not press down the feeder forcefully, as this may damage the platen glass and cause personal injury.
NOTE
Remove the original from the platen glass when scanning is complete.
Place the originals into the feeder when you want to copy several originals at the same time, and press 
(Start). The machine automatically feeds the originals to the scanning area and scans them.
(Start). The machine automatically feeds the originals to the scanning area and scans them.1. Fan the stack of the originals and even the edges.
2. Adjust the slide guides to the width of the originals.
3. Neatly place the originals face up in the original supply tray.
The originals are ready for scanning.
NOTE
- Do not add or remove originals while they are being scanned.
- When scanning is complete, remove the originals from the originals delivery tray to avoid paper jams.
- Avoid scanning the same original through the feeder more than 30 times. When scanned repeatedly, originals can become folded or torn, which may cause paper jams.
- If the feeder rollers are soiled from scanning originals written in pencil, clean them.