Install the Software(USB Connection)
18-May-2009
8200406400
Solution
NOTE
If the Found New Hardware or Found New Hardware Wizard dialog box appears:
(1) Remove the USB cable connected to your computer. The dialog box may close. In this case, proceed from step 1.
(2) Click Cancel to quit the dialog box.
(3) Proceed from step 1.
1. TURN OFF THE MACHINE (A).
IMPORTANT
- Operating noise continues for about 30 seconds until the machine turns off. Make sure that the mode button (B) stops flashing.
2. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
The setup program should start automatically.
->Windows Vista Go to Step 3.
->Windows XP/2000 Go to Step 5.
NOTE
- If the program does not start automatically, double-click the CD-ROM icon on the computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.
3. AutoPlay screen appears, click Run Msetup4.exe.
4. User Account Control dialog box appears, click Continue.
If the same dialog box reappears in subsequent steps, click Continue.
5. Select your place of residence, then click Next.
NOTE
If the Select Language screen appears, select a language, then click Next.
6. Select a country or region, then click Next.
NOTE
Displayed only when Europe, Middle East, Africa or Asia is selected on the screen in step 5.
7. Click Easy Install.
Drivers, application software, and on-screen manuals are installed automatically.
NOTE
- If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.
8. Click Install.
NOTE
Move the cursor over items to display explanations.
9. Select a connection method and click Next.
10. Read the License Agreement screen carefully and click Yes.
11. When the Please Allow All Install Wizard Processes screen appears, click Next.
Installation starts.
IMPORTANT
- During installation, follow any on-screen instructions to install the software.
- USB Connection
1. When the Printer Connection screen appears, connect the machine to the computer with a USB cable.
NOTE
- The USB port is located on the right side at the back of the machine.
- Use the supplied USB cable.
2. When the machine is recognized by the computer, a message appears on the screen. Turn on the machine (A).
IMPORTANT
If installation does not continue after 10 minutes, click Help on the screen in step 1, then confirm the message.
- Information
1. When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (A) and click Next.
NOTE
For details, refer to Loading Paper.
2. Click Next.
It may take a while for the next screen to appear. Click Next only once.
3. Click Next.
If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your machine. You will need your product serial number, which is located on the inside of the machine.
IMPORTANT
Internet connection is required. (Connection fees apply.)
NOTE
- To register later, click Cancel. User registration can be started from the Canon Solution Menu icon.
- If you are already registered, the Product Registration screen appears.
4. When the Extended Survey Program screen appears, confirm the message.
If you can agree, click Agree. If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.)
5. Click Exit.
If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
1. Connect the machine to the computer with a USB cable.
Make sure the machine is turned on.
NOTE
- The USB port is located on the right side at the back of the machine.
- When using WPS (Wi-Fi Protected Setup) or connecting an additional computer, make sure that the machine is turned on, then go to step 2. It is not necessary to connect the machine to the computer with a USB cable.
- Use the supplied USB cable.
2. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
3. Double-click the Setup icon.
If the CD-ROM folder does not open automatically, double-click the CANON_IJ icon on the desktop.
4. Enter your administrator name and password.
Click OK.
If you do not know your administrator name or password, click Help, then follow the on-screen instructions.
5. Select your place of residence, then click Next.
NOTE
If the Select Language screen appears, select a language, then click Next.
6. Select a country or region, then click Next.
NOTE
Displayed only when Europe, Middle East, Africa or Asia is selected on the screen in step 5.
7. Click Easy Install.
Drivers, application software, and on-screen manuals are installed automatically.
NOTE
- If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.
8. Click Install.
NOTE
Move the cursor over items to display explanations.
9. Read the License Agreement screen carefully and click Yes.
Installation starts.
IMPORTANT
- During installation, follow any on-screen instructions to install the software.
10. When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (A) and click Next.
NOTE
For details, refer to Loading Paper .
11. Click Next.
12. Click Next.
If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your machine. You will need your product serial number, which is located on the inside of the machine.
IMPORTANT
- Internet connection is required. (Connection fees apply.)
NOTE
- To register later, click Cancel. User registration can be started from the Solution Menu icon.
- If you are already registered, the Product Registration screen appears.
13. When the Extended Survey Program screen appears, confirm the message.
If you can agree, click Agree. If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.)
NOTE
The screen does not appear on Mac OS X v.10.3.9.
14. Click Restart.
When the computer restarts, Canon IJ Network Tool starts automatically.
After restarting the computer, remove the Setup CDROM and keep it in a safe place.
NOTE
- When using Mac OS X v.10.3.9, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator EX as the launch application on Image Capture under Applications. For details, refer to "Saving Scanned Data to PC Using the Operation Panel of the Machine" in "Scanning" in the on-screen manual: Advanced Guide.
- USB Connection
On the Canon IJ Network Tool screen, select USB connection, then click OK.
