Printing Photos Saved on the Memory Card / USB Flash Drive
11-Dec-2009
8200687500
Solution
Preview each photo from the memory card or USB flash drive on the LCD, to select and print the desired photo.
This section describes the procedure to print borderless photos on 4" x 6" / 10 x 15 cm photo paper.
You need to prepare:
A memory card with saved photos.
See [ Before Inserting the Memory Card ]
A USB flash drive with saved photos.
Photo paper for printing.
See [ Media Types You Can Use ]
1. Prepare for printing.
(1) Make sure that the power is turned on.
(2) Load paper.
-> [ Loading Paper ]
Here we load 4" x 6" / 10 x 15 cm photo paper in the Rear Tray.
(3) Open the Paper Output Tray gently.
2. Insert a memory card or USB flash drive.
Memory card : Insert it WITH THE LABELED SIDE FACING TO THE LEFT into the Card Slot.
USB flash drive : Insert it into the Direct Print Port.
If the memory card or USB flash memory is inserted when the copy standby screen or fax standby screen is displayed, the photo selection screen in Select photo print will appear.
If the photo selection screen does not appear
Press the CARD button.
If the message appears
If photos and documents (PDF files) are saved on the memory card or USB flash drive, the message "Photos and documents (PDF) are saved. Which do you want to print?" will appear.
Select Print photos to print photos, and press the OK button. The photo selection screen in Select photo print will appear.
Select Print documents to print documents (PDF files), and press the OK button.
(A) USB flash drive
(B) Memory card
NOTE
- If the document selection screen in Select doc. print appears, there are no photos on the memory card or USB flash drive.
- Do not insert memory card and USB flash drive at the same time. Also do not insert two or more memory cards at the same time.
- When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot print image data from the memory card using the Operation Panel on the machine. To print image data from the memory card, press the Setup button to select Device settings, Device user settings, and set Read/write attribute to Not writable from PC.
* You can print image data from the USB flash drive regardless of the setting in Read/write attribute.
- You can also select useful printing functions other than Select photo print.
3. Select photos to print.
(1) Use the 
, 
, 
or 
button (Scroll Wheel) (C) to move the cursor to a desired photo.
, , or button (Scroll Wheel) (C) to move the cursor to a desired photo.
(2) Use the Numeric buttons to specify the number of copies.
NOTE
-
may appear on the LCD while reading photos. If you use the , , or button (Scroll Wheel) to display the photo while appears on the LCD, the desired photo may not be selected. - If you press the center Function button (D), the screen will switch to the full-screen display. You can also specify the number of copies on this screen. If you press the center Function button again, the screen will switch to the trimming screen. You can crop photos.
(3) Repeat the procedures of (1) and (2) to specify the number of copies for each photo.
NOTE
- If you select a photo for which the number of copies is not specified (copies "00") and press the OK button, "01" is set for the number of copies and the screen to change the number of copies will appear.
Use the or button (Scroll Wheel) or the Numeric buttons to specify the number of copies, and press the OK button to return to the screen in (1).
or button (Scroll Wheel) or the Numeric buttons to specify the number of copies, and press the OK button to return to the screen in (1).4. Start printing.
(1) Press the right Function button (E) to select Print settings, and confirm the page size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for Type.
To change the settings, use the or button (Scroll Wheel) to select the item to change, and use the or button to select an option. After confirming or changing the settings, press the OK button to return to the photo selection screen.
or button (Scroll Wheel) to select the item to change, and use the or button to select an option. After confirming or changing the settings, press the OK button to return to the photo selection screen.NOTE
- You can specify Photo fix or Print date on the print settings screen.
(2) Confirm the number of sheets to be used for printing the selected photos.
(3) Press the Color button.
The machine starts printing photos.
NOTE
- If you press the left Function button (F) to select Menu, you can select various photo print functions other than Select photo print.
- Press the Stop button to cancel printing.
- Printing does not start if you press the Black button.