Checking for Nozzle Clogging (iPF6300/iPF6350)
03-Mar-2010
8200760100
Solution
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test pattern to check the nozzles.
NOTE
- Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu in "Nozzle Check".
1.Load unused paper.
2.On the "Tab Selection screen" of the Control Panel, press 
or 
to select the Settings/Adj. tab (
).
or to select the Settings/Adj. tab ().
NOTE
- If the "Tab Selection screen" is not displayed, press the "Menu" button.
3.Press the "OK" button.
The "Set./Adj. Menu" is displayed.
4.Press 
or 
to select "Test Print", and then press the "OK" button.
or to select "Test Print", and then press the "OK" button.5.Press 
or 
to select "Nozzle Check", and then press the "OK" button.
or to select "Nozzle Check", and then press the "OK" button.The printer now prints a test pattern for checking the nozzles.
6.Check the printing results.
If the horizontal lines are not faint or incomplete, the nozzles are clear.
If some sections of the horizontal lines are faint or incomplete, the nozzles for those colors are clogged.
If horizontal lines are faint or incomplete, follow the steps below and check again for nozzle clogging.
(1) Clean the Printhead.
(2) Print a test pattern to check the nozzles.
NOTE
- If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact your Canon Help Desk.