How to set High-Speed Continuous Shooting (High-speed Burst) (PowerShot SD4500 IS / IXUS 1000 HS)

25-Aug-2010
8200879700

Solution

    You can shoot continuously at a maximum speed of approximately 8.8 images/second while the <shutter button> is pressed fully and held.
    CAUTION
    • Recording pixels are fixed to 1824 x 1368 pixels ().
    • Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
    • Focus, exposure and white balance settings are set with the first shot.
    • As the number of images increases, the shooting interval may take longer.
    • [ISO speed] is set to [AUTO] ().
    • The main functions that are not available in the [High-speed Burst] () mode are as follows:
    - [Flash] (), [Digital Zoom], [Date Stamp]
    For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.

    1. Set the <Mode Switch> to [Shooting] () and then press the <Power> button.




    2. Press the <FUNC./SET> () button.




    3. The following screen appears on the LCD monitor.



    Operate the <directional buttons> up or down to select the [Rec. Mode]. (If no changes have been made so far, [Program AE] () will be displayed.)
    Press the <FUNC./SET> () button.


    4. The following screen appears on the LCD monitor.



    Operate the <directional buttons> up or down to select the [High-speed Burst] ().
    Press the <FUNC./SET> () button.


    5. The following screen appears on the LCD monitor.



    If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.
    As long as you hold the <shutter button> down, the camera will shoot successive images.