What to do when there is no sound during playback
28-Dec-2010
8201020900
Solution
In cases where there is no sound during playback, please follow the following procedure.
- There is no sound if the speaker volume is turned off. Please follow the procedure below to adjust the volume.
1. During playback, open < 
> the joystick guide.
> the joystick guide.
2. Select < 
> the top row [ 
].
> the top row [ ].
3. Adjust < 
> the volume.
> the volume.
To turn off the volume, keep the joystick pressed < 
> toward until the volume bars disappear.
> toward until the volume bars disappear.- If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it.
Playback looks fine on the camcorder but there is no image and sound on the TV.
- The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input.
NOTE
For details on the TV settings, please refer to the instruction manual for the TV.
If there is no sound during playback even after trying the procedures above, please contact our service centers.