Saving Photos on a Computer
16-May-2012
8201108200
Solution
If your computer is running Windows 7, Windows Vista, Windows XP or Mac OS X, you can save your photos simply by connecting the camcorder to the computer using the supplied USB cable.
1. Power the camcorder using the compact power adapter.
2. Press <
> to open the playback mode.
> to open the playback mode.3. Switch to the screen that displays the photos you wish to save.
Open the index screen of the built-in memory, memory card A, or memory card B.
3-1. Touch [ 
].
].
3-2. Select the memory where the photos are saved, and then touch [Photos].
3-3. The [Photos] index screen appears.
4. Connect the camcorder to the computer using the supplied USB cable.
5. The camcorder will appear as a new device (or drive), for example, [Canon XA10]. Use the program of your choice or the standard application built into your computer’s operating system to transfer or copy your photos to the computer.
- Windows 7/Vista: Your photos can be found under [Canon XA10] > [Removable Storage] > [DCIM] > [xxxCANON], where "xxx" is a folder number between 101 and 998.
- Windows XP: Your photos can be found under [Canon XA10].
- Mac OS X: iPhoto will start up automatically and [Canon XA10] will appear as a new device.
IMPORTANT
- When the camcorder is connected to a computer:
- Do not open the double memory card slot cover and do not remove the memory cards.
- Do not change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data loss. Always use only the supplied PIXELA’s software to save your movies on the computer and, if necessary, to transfer back previously saved video files to the camcorder.
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the camcorder’s operating mode.
- When restoring to the camcorder video files that were previously saved to the computer, do not disconnect the USB cable or turn off the camcorder or computer. Doing so may result in scenes that cannot be played back on the camcorder.
- Operation may not work correctly depending on the software and the specifications/settings of your computer.
- If you wish to use the image files on your computer, make copies of them first. Use the copied files, retaining the originals.
NOTE
- Refer also to the computer’s instruction manual.
- If you connect the camcorder to the computer while it is set to
mode, the process of creating scene thumbnails will start automatically. If your intention was to save photos to the computer, you can touch [Skip] to stop the process and use the computer’s Safely Remove Hardware function (Windows) or Eject function (Mac OS) to end the connection to the camcorder. Disconnect the USB cable, set the camcorder to 
mode and restore the connection.