Issue
Banding in different colors occurs
Cause and Solution
<Cause1> The paper feed amount is out of adjustment.
<Corrective Action>
Adjust the feed amount.
<Cause2> Printing does not proceed smoothly because print jobs are interrupted during transmission.
<Corrective Action>
Exit other applications and cancel other print jobs.
<Cause3> In the Control Panel menu, [Adj. Priority] is set to [Print Length].
<Corrective Action>
Setting [Adj. Priority] to [Print Quality] in the Control Panel menu and adjusting the feed amount may improve results.
<Cause4> The Printhead is out of alignment.
<Corrective Action>
Adjust the Printhead alignment.
<Cause5> The Printhead nozzles are clogged.
<Corrective Action>
Print a test pattern to check the nozzles and see if they are clogged.
<Cause6> Streaks may occur if you set the [Print Quality] too low.
<Corrective Action>
Choose a higher level of [Print Quality] in the [Advanced Settings] of the printer driver and try printing again.
Printing in [Fast] or [Standard] mode is faster and consumes less ink than in [Highest quality] or [High] modes, but the printing quality is lower.
<Cause7> The type of paper specified in the printer driver does not match the type loaded in the printer.
<Corrective Action1>
Load paper of the same type as you have specified in the printer driver.
<Corrective Action2>
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1. Press the [Stop] button and stop printing.
2. Change the type of paper in the printer driver and try printing again.