Solution
The Overall Print Result Is Faint
<Cause 1>
The setting for the toner density is not appropriate.
<Solution>
Adjust the toner density for printing to a darker setting.
For details on the procedure for adjusting the toner density, see "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
<Cause 2>
[Toner Save] is enabled.
<Solution>
Perform the following procedure in the printer driver.
1. Display the [Quality] sheet.
2. Click [Advanced Settings].
3. Set [Toner Save] to [Off].
<Cause 1>
The setting for [Paper Type] is not specified properly.
<Solution>
Specify [Paper Type] properly.
For details on the procedure for specifying [Paper Type], see "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
* If you are using envelopes, specify [Envelope H].
<Cause 2>
Appropriate paper is not being used.
<Solution>
Replace the paper with that which can be used with this printer. [
Usable Paper ]
<Cause 3>
The toner cartridges have reached the end of their life.
<Solution>
Check the toner cartridges status and replace the toner cartridges of the colors have reached the end of their life.
For details on installing the toner cartridge, see "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.
<Cause 4>
When coarse paper is used, the toner does not fix onto paper well, and the print may come out faint.
<Solution>
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings A6].
* Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the described problems occur.
<Cause 5>
Depending on the paper type or the operating environment (especially in a high-humidity environment), images in which two or more colors (especially red, blue, and green) are overlaid may come out faint.
<Solution>
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings B4].
* Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the described problems occur.