Specifying the Basic Settings for Faxing

    28-Feb-2012
    8201324500

    Solution

    You can set the sender information such as date/time, unit name, and unit fax/telephone number.

    About the Sender Information
    If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.
    (A) Date and time of transmission
    (B) Unit fax/telephone number
    (C) Unit name
    (D) The registered recipient's name is printed when sending faxes with the coded speed dial.
    (E) Page number
    REFERENCE
    • You can print the User's data list to confirm the sender information you have registered.
    • When sending faxes in black & white, you can select whether to print the sender information inside or outside the image area.
    Specify the setting on TTI position in Advanced FAX settings under FAX settings.
    • You can select the date print format from three formats: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
    Select the date print format on Date display format under Device user settings.

    Setting the Date and Time
    This section describes the procedure to set the date and time.

    1. Make sure that the machine is turned on.

    2. Press the MENU button.
    The menu screen is displayed.

    3. Select Setup, then press the OK button.

    4. Select Device settings, then press the OK button.

    5. Use the button to select Device user settings, then press the OK button.

    6. Use the button to select Date/time setting, then press the OK button.

    7. Set the date and time.
    Use the button to move the cursor under the desired position, then use the button to enter the date and time.
    Enter the date and time in 24-hour format.
    Enter only the last two digits of the year.

    8. Press the OK button.

    9. Press the FAX button to return to the Fax standby screen.

    Setting Daylight Saving Time (Summer Time)
    Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.
    You can set your machine to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends.
    IMPORTANT
    Not all the latest information of all countries or regions is applied for Summer time setting by default. You need to change the default setting according to the latest information of your country or region.
    REFERENCE
    This setting may not be available depending on the country or region of purchase.

    1. Make sure that the machine is turned on.

    2. Press the MENU button.
    The menu screen is displayed.

    3. Select Setup, then press the OK button.

    4. Select Device settings, then press the OK button.

    5. Use the button to select Device user settings, then press the OK button.

    6. Use the button to select Summer time setting, then press the OK button.

    7. Use the button to select ON, then press the OK button.
    To disable summer time, select OFF.

    8. Set the date and time when summer time starts.
    (1) Set the date when summer time starts.
    Use the button to change the setting item, use the button to change the setting, then use the OK button to confirm the selection.
    (2) Set the time (in 24-hour format) when summer time starts.
    Use the button to move the cursor under the desired position, use the button to enter the time, then press the OK button.
    Precede single digits with a zero.

    9. Set the date and time when summer time ends.
    (1) Set the date when summer time ends.
    Use the button to change the setting item, use the button to change the setting, then use the OK button to confirm the selection.
    (2) Set the time (in 24-hour format) when summer time ends.
    Use the button to move the cursor under the desired position, use the button to enter the time, then press the OK button.
    Precede single digits with a zero.

    10. Press the FAX button to return to the Fax standby screen.

    Registering User Information
    This section describes the procedure to register the user information.
    REFERENCE
    Before sending a fax, be sure to enter your name and fax/telephone number in Unit name and Unit TEL on the User information settings screen (for US only).

    1. Make sure that the machine is turned on.

    2. Press the MENU button.
    The menu screen is displayed.

    3. Select Setup, then press the OK button.

    4. Select Device settings, then press the OK button.

    5. Use the button to select FAX settings, then press the OK button.

    6. Use the button to select FAX user settings, then press the OK button.

    7. Use the button to select User information settings, then press the OK button.
    The screen to register the unit name and the unit fax/telephone number is displayed.

    8. Enter the unit name.
    (1) Use the button to move the cursor to Unit name.
    (2) Press the OK button.
    The screen to enter the character is displayed.
    (3) Enter the unit name.
    (4) Press the left Function button.
    REFERENCE
    You can enter the name up to 24 characters, including spaces.
    For details on how to enter or delete characters:
    -> Refer to [ Entering Numbers, Letters, and Symbols ] within this webpage.

    9. Enter the unit fax/telephone number.
    (1) Use the button to move the cursor to Unit TEL.
    (2) Press the OK button.
    The screen to enter the number is displayed.
    (3) Enter the unit fax/telephone number.
    (4) Press the left Function button.
    REFERENCE
    You can enter the fax/telephone number up to 20 digits, including spaces.
    For details on how to enter or delete characters:
    -> Refer to [ Entering Numbers, Letters, and Symbols ] within this webpage.

    10. Press the left Function button to finalize registration.

    11. Press the FAX button to return to the Fax standby screen.

    Entering Numbers, Letters, and Symbols
    The machine allows you to enter characters by selecting them from an on-screen character list when registering information, such as unit name, a recipient's name for coded speed dial, etc.

    • Switching the Input Mode
    The machine has three input modes: uppercase mode, lowercase mode, and numeric mode. When you press the center Function button (Aa1), the input mode is switched in the following order: uppercase mode, lowercase mode, then numeric mode.
    REFERENCE
    • For unit telephone number entry or fax/telephone number entry for coded speed dial, only the numbers and symbols available for that type of entry are displayed on the screen.

    • Entering Numbers, Letters, and Symbols
    Press the , , , and button (A) to select the character, then press the OK button (B).
    To enter a space, select Space.
    To delete the last character you entered, press the right Function button to select Del. character.
    After all characters are entered, press the left Function button to select Done.

    • Editing Entered Numbers, Letters, and Symbols
    To edit entered characters, press the or button to select the entry column (A).

    Press the or button to move the cursor under the position you want to edit.

    • To insert a space
    Select Space, then press the OK button.
    • To insert a character
    Select the character you want to insert, then press the OK button.
    • To delete a character
    Press the right Function button to select Del. character. When the cursor is at the end of the characters and Del. character is selected, the left character of the cursor will be deleted (backspace).