How to Replace the Toner Cartridge (MF3110/MF3112)
11-Nov-2011
8201341300
Solution
1.Open the front cover.
2.Remove the cartridge from the machine.
3.Remove the new cartridge from its protective bag.
NOTE
Save the protective bag. You may need it later when you remove the cartridge from the machine.
4.Rock the cartridge 5 or 6 times to distribute the toner evenly.
5.Place the cartridge on a flat and stable surface.
Grip the sealing tape tab (A) and snap it in the direction as shown below.
Make sure that the tab itself is detached from the cartridge.
6.While grasping the cartridge with one hand, firmly and slowly pull the sealing tape tab with the other hand to remove the sealing tape completely.
Throw the tape away.
IMPORTANT
To avoid breaking the tape, do not pull out the tape at an upward or downward angle.
7.Hold the cartridge with instructions (B) face up and arrow (C) pointing to the machine. Insert the cartridge as far as it will go.
(C): Arrow
8.Close the front cover.
NOTE
If the LCD displays [INSTALL CARTRIDGE], reset the machine by opening the front cover and then closing it.