Solution
Two-sided copying enables you to make two-sided copies from one-sided documents. This feature can be used together with both [Collate Copy] and [2 on 1 Combination].
NOTE
Paper used to make two-sided copies must conform to the following specifications:
- Paper weight: 64 to 80 g/m2
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [COPY].
3. Press [2-sided] repeatedly to select [1 - 2-SIDED], then press [OK].
4. Press [Left cursor] or [Right cursor] to select [BOOK TYPE] or [CALENDAR TYPE], then press [OK].
[BOOK TYPE]: The front and back sides of the copy will have the same top-bottom orientation.
[CALENDAR TYPE]: The front and back sides of the copy will have opposite top-bottom orientations.
NOTE
For the landscape oriented documents, the front and back sides of the copy will have the opposite top-bottom orientation when [BOOK TYPE] is selected.
When [CALENDAR TYPE] is selected, the front and back sides of the copy will have the same top-bottom orientation.
5. Use the numeric keys to enter the desired copy quantity (1 to 99).
6. Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning is complete, press [OK].
NOTE
a. To cancel all settings, press [Stop/Reset].
b. When you switch the mode by pressing the mode keys such as [SEND/FAX], all settings will be also canceled.
c. Instead of performing step 4, you can just press [OK]. In this case, the machine makes [BOOK TYPE] copies.