How to Add Pauses to the Number (MF4680)
Solution
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [SEND/FAX] repeatedly to select [FAX], then press [OK].
3. Use the numeric keys to dial the international access code.
For details on international access codes, contact your local telephone company.
4. If necessary, press [Recall/Pause] to enter a pause.
- You can enter successive pauses within the fax number to make the pause time longer.
- You can change the length of a pause inserted within the fax number in the [PAUSE TIME] menu. The default setting is two second.
5. Use the numeric keys to dial the country code, the area code, and the fax/telephone number of the recipient.
6. If necessary, press [Recall/Pause] to enter a pause at the end of the number.
- The letter [P] appears at the end of the fax number.
- Pauses entered at the end of fax numbers are always 10 seconds long.
7. Press [Start].
When you set the documents on the platen glass, press [Left cursor] or [Right cursor] to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
NOTE
When [TIME OUT] is set to [ON] in [TX SETTINGS] in [FAX SETTINGS] in [TX/RX SETTINGS], and if you have specified the destination by any other method than using numeric keys, the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed.