How to set Continuous Shooting

    28-Feb-2012
    8201444200

    Solution


      You can shoot pictures continuously as long as you hold down the shutter button.
      IMPORTANT
      • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().
      • Cannot be used with the self-timer or [Blink Detection].
      • During continuous shooting, the focus position and exposure will be fixed at what they were when the shutter button was half-pressed.
      • Depending on the shooting conditions, the camera settings and the zoom position, the camera may stop shooting momentarily, or the shooting speed may slow down.
      • As the number of images increases, the shooting speed may slow down.
      • If the flash fires, the shooting speed may slow down.
      • When using the [Touch Shutter] function with the PowerShot A3400 IS, even if [Continuous Shooting] () mode is selected, only one shot will be taken. Please use the shutter button.
      • Continuous shooting speed increases in [Low Light] () mode.
      • In the following shooting modes, you cannot set the [Continuous] ().
      - [Live View Control] (), [Auto] (), [Face Self-Timer] (), [Long Shutter] (), [iFrame Movie] (), [Digital IS] ()*
      * PowerShot A2300 / A1300 / A810 only. Depending on the scene, either 1 shot will be recorded, or several continuous shots will be combined.
      • The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.
      For information on the maximum speeds of the [Continuous Shooting] made, please see the table at the end of this section.

      1. Press the <Power> button.


      2. Press the <FUNC./SET> () button.


      3. The following screen appears on the LCD monitor.



      Operate the <directional buttons> up or down to select the [Drive Mode] ().
      Operate the <directional buttons> left or right to select the [Continuous] ().
      After the selection is made, press the <FUNC./SET> button ().


      4. The following screen appears on the LCD monitor.



      If the [Continuous] () icon is displayed on the upper-left part of the screen, the setting is completed.
      As long as you hold the <shutter button> down, the camera will shoot successive images.

      For information on the maximum speeds of the [Continuous Shooting ] made, please see the table below.
      ModelMaximum Speed (Approx. Images/sec.)

      When Set
      PowerShot A1300
      PowerShot A4000 IS
      PowerShot A2400 IS
      PowerShot A2300
      0.8 2.8
      PowerShot A810
      PowerShot A3400 IS
      0.8 2.7