Setting the Flash (Flash On)
26-Jul-2012
8201451700
Solution
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
). - The position and shape of the operation buttons, images displayed, and setting items may differ depending on the model you are using.
- In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
- [AUTO] (
), [High-speed Burst] (
), [Handheld NightScene] (
), [Low Light] (
), [Fireworks] (
)*, [iFrame Movie] (
), [Super Slow Motion Movie] (
)
), [High-speed Burst] (), [Handheld NightScene] (), [Low Light] (), [Fireworks] ()*, [iFrame Movie] (), [Super Slow Motion Movie] ()1. Press the <Power> button on the camera.
2. Touch (
).
).
3. The following screen will appear in the LCD screen.
Touch (
) to select it, and then touch () once again.
) to select it, and then touch () once again.4. If the following icon is displayed on the monitor, this completes the setting process.
