Turning the printer ON/OFF
15-Feb-2012
8201471700
Solution
The power switch to turn the printer ON/OFF is located on the rear side of the printer.
In order to use this printer, you should press " 
" of the power switch to turn the printer ON. After running a self-diagnostic test on the main unit, the printer will be ready to print.
" of the power switch to turn the printer ON. After running a self-diagnostic test on the main unit, the printer will be ready to print.IMPORTANT
- Do not turn the power ON immediately after turning it OFF. If you want to turn the printer ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF before turning it ON again.
- When the power of the printer is turned ON for the first time after installing the printer, blank paper may be delivered. However, this is not an abnormality.
1. Press " " of the power switch to turn the printer ON.
" of the power switch to turn the printer ON.
The Power indicator on the printer comes on, and the printer initiates a self-diagnostic test of the main unit. If no abnormalities are found during the self-diagnostic test, the printer is ready to print.
IMPORTANT
- If the printer is used in a network environment, make sure that it is not printing data from another computer before turning the power OFF.
- If you turn the printer OFF, all print data remaining in the printer memory will be erased. Wait for the necessary print data to be printed before turning the power OFF.
- Do not turn the power OFF when the printer is in any of the following status:
- While the printer is in the middle of printing
- While the printer is running a self-diagnostic test immediately after turning the power ON
1. Press " 
" of the power switch to turn the printer OFF.
" of the power switch to turn the printer OFF. 