Solution
If you are using a printer connected to a network using TCP/IP protocol, you can automatically search for its printer port. To install the printer driver by dynamic installation, follow the procedure below.
IMPORTANT
Operational requirements and restrictions are indicated at the end of this page. Be sure to read these items carefully in order to operate the printer correctly, and to avoid damage to the printer.
1. Insert the CD-ROM supplied with the printer into the CD-ROM drive.
2. Double-click the [My Computer] icon -> the CD-ROM drive icon.
3. Double-click the following folders: [PCL] or [UFRII] -> [uk_eng].
4. Double-click the [Setup.exe] icon to start the installation process.
5. In the first dialog box of the PCL or UFR II Printer Driver Setup Wizard, click [Next].
The [License Agreement] dialog box is displayed.
6. Read the license agreement carefully. If you agree to the terms -> click [Yes].
7. Select [Search for Network Printers to Install] -> click [Next].
NOTE
a. To search for printers in sleep mode on the network, select [Reactivate Printers in the Sleep Mode and Search].
b. If you have installed Canon Driver Information Assist Service and are using an operating system equipped with Windows Firewall, when the following dialog box is displayed, click [Yes] or [No].
- If you select [Yes], Windows Firewall will be configured to unblock the connection for Canon Driver Information Assist Service, so that you can set up the printer configuration automatically or use the Job Accounting feature.
- If you select [No], you cannot use Canon Driver Information Assist Service.
8. Select [PCL5e/5c Printer Driver] or [PCL6 Printer Driver] -> click [Next].
If you are using UFR II Printer Driver, proceed to Step 9.
NOTE
Depending on the printer you are using, this dialog box is not displayed. In this case, proceed to step 9.
9. Click [Next].
If the required drivers have already been installed using the installer, the following screen is displayed. Select an option under [Process to Install Printer Driver] -> click [Next].
[Process to Install Printer Driver]
- [Add Printers and Update Existing Drivers]: You can install a new driver and update existing drivers simultaneously.
- [Add Printers]: You can add a new driver without affecting existing drivers.
If you want to install the Canon Driver Information Assist Service together with the printer driver, also select [Canon Driver Information Assist Service].
NOTE
a. If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC in order to set up the printer configuration automatically or to use the Job Accounting feature.
b. If the Canon Driver Information Assist Service is already installed on your computer, [Canon Driver Information Assist Service] does not display.
c. If you are using an operating system equipped with Windows Firewall, when the following dialog box is displayed, click [Yes] or [No]
- If you select [Yes], Windows Firewall will be configured to unblock the connection for Canon Driver Information Assist Service, so that you can set up the printer configuration automatically or use the Job Accounting feature.
- If you select [No], you cannot use Canon Driver Information Assist Service.
10. Select the printer driver(s) you want to install from [Printer List] -> click [Add].
If you want to select all the printer drivers found, click [Select All].
The printer driver(s) you selected is added to [Printer List for Driver Installation].
NOTE
a. You can also add a printer driver to [Printer List for Driver Installation] by double-clicking the printer driver under [Printer List].
b. To delete a printer driver that you do not want to install from [Printer List for Driver Installation], select the printer driver -> click [Remove].
11. Check that the printer driver(s) you want to install is selected in [Printer List for Driver Installation].
12. If you want to change the printer name, or set the printer as the default printer, select [Set Printer Information] -> click [Next].
If you do not want to change these settings, click [Next] -> Proceed to Step 14.
13. Enter a printer name in [Printer Name], or select [Set as Default] -> click [Next].
NOTE
If you want to specify shared printer settings, or are installing an alternate driver in Windows NT 4.0/2000/XP/Server 2003, select [Use as Shared Printer]. For instructions on how to specify detailed settings for a shared printer, see "How to configure the print server (computer) (Windows NT 4.0/2000/XP/Server 2003)" in Related Information at the end of this page.
14. Verify the installation settings -> click [Start].
15. After the files are copied, click [Exit] to finish the installation.
Restart your computer when a message is displayed prompting you to do so.
The printer icon is displayed in the [Printers] folder. The driver is now installed.
IMPORTANT
You can search only for printers in the same subnet as your computer.
NOTE
a. If you are using a local printer or a printer connected to a network using a protocol other than TCP/IP, see "How to install the printer driver" in Related Information at the end of this page.
b. The screen shots used in this section are from Windows 2000 on which PCL6 Printer Driver is used.
