Checking inside the printer
11-Apr-2012
8201522000
Solution
IMPORTANT
Operational requirements and restrictions are indicated at the end of this page. Be sure to read these items carefully in order to operate the printer correctly, and to avoid damage to the printer.
1. Open the front cover.
While pressing the lever on the top of the front cover, open it gently.
2. Remove the toner cartridge from the printer.
3. Check inside the printer.
IMPORTANT
Be careful not to touch unnecessary parts inside the printer when checking.
4. Hold the toner cartridge properly with the arrowed side facing up as shown in the figure.
5. Push the toner cartridge into the printer until it touches the back of the printer while aligning (A) on both sides of the toner cartridge with the toner cartridge guides inside the printer.
6. Close the front cover.
Close the front cover completely until it clicks.
IMPORTANT
a. Be sure not to touch the high-voltage contacts (A) or electrical contact (B) shown in the figure, as this may result in damage to the printer.
b. Do not hold the toner cartridge in a manner that is not directed in this procedure.
c. If you cannot close the front cover, check if the toner cartridge is installed properly. If you try to close the front cover forcefully, this may result in damage to the printer or toner cartridge.
d. Do not leave the front cover open for a long time after installing the toner cartridge.
NOTE
For details on handling toner cartridges, see "Precautions for handling toner cartridge" in Related Information at the end of this page.