How to perform calibration

Last Updated : 18-Jul-2012
Issue Number : 8201609900

Issue

Cause and Solution

Perform calibration when the printed colors are different compared to earlier printing, or color deviation occurs in order to adjust the color hue and color deviation for each toner color in color printing.

Calibration Type	Contents
[COLOR REGIS.ADJ] * It takes approximately 80 seconds to execute COLOR REGIS.ADJ.	A phenomenon of "Out-of-Register Colors" is adjusted by controlling the shifts of the print start positions of each color. Execute when the phenomenon of "Out-of-Register Colors" occurs.

[DENSITY CONTROL] * It takes approximately 37 seconds to execute DENSITY CONTROL.	Controls the maximum print density and median print density. Execute when the colors have changed and the data is not printed in the correct colors (specified colors).

[DEN.MEDIAN CONT] * It takes approximately 37 seconds to execute DEN.MEDIAN CONT.	Controls the median print density. Execute when the colors of the median print density have changed and the data is not printed in the correct colors (specified colors).

[FULL CALIBRATE] * It takes approximately 133 seconds to execute FULL CALIBRATE.	Executes [COLOR REGIS.ADJ] and [DENSITY CONTROL]. Execute when you want to adjust a phenomenon of "Out-of-Register Colors" and control the print density (adjust color hues) at once.