Consumer Business
ENG
Consumer
Switch to: Business
Warranty Support
ENG
  1. Support
  2. Search
  3. Download
Contact Us

    Setting the Flash (Flash On) (PowerShot G15)

    18-Sep-2012
    8201649300

    Solution

      When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
      IMPORTANT
      • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().
      • In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
      - [AUTO] () , [High-speed Burst HQ] () , [Fireworks] () , [High Dynamic Range] () , [Movie] () , [iFrame Movie] () , [Super Slow Motion Movie] ()

      1. Press the <Power> button on the camera.


      Move the <Pop up flash> switch ( ) to raise the <Flash>.
      Press the <Flash> button ().



      2. The following screen will appear in the LCD screen.




      Operate the <directional buttons> to select the [Flash On] ().
      Make sure to select [On].


      3. If the following icon is displayed on the monitor, this completes the setting process.