Sending Images to a Smartphone (Wireless Connection) (EOS RP)

Last Updated : 05-Mar-2019
Issue Number : 8204322100

Solution

Introduction

Send images to a smartphone as follows.

< Connecting to a Bluetooth-compatible Smartphone via Wi-Fi >

By connecting to a Bluetooth-compatible smartphone via Bluetooth in advance, you can connect via Wi-Fi simply by performing an operation on the camera or smartphone.

< Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu >

You can use Wi-Fi to connect to a smartphone that is not compatible with Bluetooth or a smartphone that cannot use its Bluetooth function.

IMPORTANT

To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated app Camera. Connect (free of charge) must be installed on the smartphone.
Interface or functions of the camera and Camera Connect are subject to change for firmware update of the camera or application update of Camera Connect, Android, iOS, etc. In such a case, features of the camera or Camera Connect may differ from sample screens or operation instructions in this manual.

NOTE

In the following explanation, smartphone setting procedures are indicated by the , and camera setting procedures are indicated by the icon.
For convenience, smartphones, tablets, and other compatible devices are collectively referred to as "smartphones".
The setting procedures and items may differ depending on the smartphone model you use and its OS. For more information, refer to your smartphone's instruction manual.
On the screen, wireless signal strength is indicated by the following icons:

- [

] high, [

] medium, [

] low, [

] weak.

Connections require that a memory card be in the camera.

Illustrations and screenshots in this manual may differ slightly from the actual equipment.

Preparing the Camera

1. Set the camera's power switch to <ON>.

2. Press the <

> button to display the menu screen.

3. Press the <

> button to select the [

] tab.

4. Turn the <

> dial to select the [

] tab.

5. Turn the <

> dial to select [Wireless communication settings].

6. Press <

7. Turn the <

> dial to select [Wi-Fi settings], then press <

8. Turn the <

> dial to select [Wi-Fi], then press <

9. Turn the <

> dial to select [Enable], then press <

10. After the [Wi-Fi settings] screen appears, press the <

> button to return to the [Wireless communication settings] screen.

11. Turn the <

> dial to select [Nickname], then press <

12. If the [Nickname] screen is displayed, press <

13. When using the displayed nickname, press the <

> button.

NOTE

You can change the nickname as needed. For more information on using the keyboard, please refer to "Virtual Keyboard Operation".

14. Turn the <

> dial to select [OK], then press <

Connecting to a Bluetooth-connected Smartphone via Wi-Fi

1. Install Camera Connect.

REFERENCE

Camera Connect can be installed from Google Play or the App Store.Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.

2. Turn the <

> dial to select [Bluetooth function], then press <

3. Turn the <

> dial to select [Bluetooth function], then press <

4. Turn the <

> dial to select [Smartphone], then press <

5. Turn the <

> dial to select [Pairing], then press <

6. Turn the <

> dial to select [Do not display], then press <

Pairing now begins.

7. Activate Bluetooth on the smartphone, and then start Camera Connect on the smartphone.

After the camera is recognized, a camera selection screen is displayed.

8. Complete the pairing process for the smartphone.

9. Turn the <

> dial to select [OK], then press <

On the pairing notification screen, press the < >.

IMPORTANT

Pairing or Bluetooth connection is not possible if the camera is connected to a computer or another device with an interface cable.
The camera cannot be connected to two or more devices at the same time via Bluetooth.
Bluetooth connection consumes battery power even after the camera’s auto power off is activated. Therefore, the battery level may be low when you use the camera.
Keeping pairing records for previously paired cameras on your smartphone will prevent it from pairing with this camera. Before you try pairing again, remove pairing records for previously paired cameras from your smartphone’s Bluetooth settings screen.

10. Choose [Images on camera] in Camera Connect.

For Android, it will automatically switch to the Wi-Fi connect screen.
For iOS, when the following screen appears, touch [Copy password and display smartphone's Wi-Fi settings screen].

In the Wi-Fi menu, choose the SSID displayed on the camera, paste the copied password.

NOTE

[

Wi-Fi on ] is displayed on the camera.

11. When the camera is connected to the smartphone, a list of the images on the camera will appear in Camera Connect. Tap [Select] appearing in the upper right of the screen.

12. After the screen refreshes, choose the desired images (

), and then touch [

] (

) on the bottom of the screen.

To select all images at once, press the [ ] icon in the upper right of the screen, and then touch [ ] on the bottom to save them on your smartphone.

NOTE

A screen to set an "Image save size" option may be displayed, so choose an option and touch [OK].

13. After the images have been saved, touch [

] appearing in the upper right of the screen, and then touch [

] in the upper left of the screen to return to the menu screen.

14. To end the connection, touch the [

] icon displayed in the upper right of the screen, and then touch [YES].

REFERENCE

To switch to Bluetooth, disable the Wi-Fi connection on the smartphone.

Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu

These steps show how to use the camera as an access point, but you can also use an existing access point.

1. Install Camera Connect.

REFERENCE

Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.

2. Turn the <

> dial to select [Wi-Fi function], then press <

NOTE

If the following screen appears, press the

buttons, the screen for step 3 will appear.

3. Turn the <

> dial to select [

], then press <

4. Turn the <

> dial to select [Register a device for connection], then press <

5. Turn the <

> dial to select [Do not display], then press <

6. Check the SSID (network name) (

) and password (

"_Canon0A" is displayed at the end of the SSID.

7. Turn Wi-Fi settings to ON in your smartphone, choose the SSID (

) from step 6.

In the password field, enter the password checked in step 6 ( ).

8. Touch the [

] icon to start Camera Connect.

9. On the camera selection screen displayed on the smartphone, choose the camera to begin pairing.

10. Turn the <

> dial to select [OK], then press <

[ Wi-Fi on ] is displayed on the camera.

11. Touch [Images on camera] in Camera Connect.

12. When the camera is connected to the smartphone, a list of the images on the camera will appear in Camera Connect. Tap [Select] appearing in the upper right of the screen.

13. After the screen refreshes, choose the desired images (

), and then touch [

] (

) on the bottom of the screen.

To select all images at once, press the [ ] icon in the upper right of the screen, and then touch [ ] on the bottom to save them on your smartphone.

NOTE

A screen to set an "Image save size" option may be displayed, so choose an option and touch [OK].

14. After the images have been saved, touch [

] appearing in the upper right of the screen, and then touch [

] in the upper left of the screen to return to the menu screen.

15. To end the connection, touch the [

] icon displayed in the upper right of the screen, and then touch [YES].

The Virtual Keyboard Operation

Use the virtual keyboard operation to enter information. Note that the length and type of information you can enter varies depending on the function you are using.

	Input area, for entering text		Space
	Cursor keys, for moving in the input area		Delete a character in the input area
	Current no. of characters/no. available		Change the type of keyboard
	Keyboard		Finish the text entry
	Switch input modes