How to Transfer Images to the Computer Using Image Transfer Utility 2 (Wi-Fi) (Windows 7)
03-Jun-2019
8204504100
Solution
How to send images from the camera to a computer using Image Transfer Utility 2.
IMPORTANT
- In the following explanation, computer setting procedures are indicated by the
icon, and camera setting procedures are indicated by the 
icon.
1. Download the software [ Image Transfer Utility 2 ] from the Canon homepage on to your computer, and proceed to installation. 2. Once the installation is complete, the settings window for [ Image Transfer Utility 2 ] will be displayed, click [ Next ] .
3. [ Preparation ] will be displayed, read the details carefully and click [ Next ] .
4. [ Pairing Setup ] will be displayed. Keep the screen as it is displayed, and move on to the next step.
1. Press the 
button.
NOTE
When the [Nickname] screen appears, press the 
button.
button.
- To use the nickname displayed, press the
button.
- Nicknames are 1 – 8 characters and can be changed later. For more information on using the keyboard, please refer to "On-Screen Keyboard".
- Press the
/ 
buttons to choose [ OK ], and then press the button.
NOTE
- If the following screen appears, press the / buttons to switch to other screens.
2. Press the button.
3. Use the zoom lever to choose the [ 
] tab.
4. Press the / buttons to choose [ 1 ]. 5. Press the 
/ 
buttons to choose [Wireless communication settings], then press the 
button.
6. Press the / buttons to choose [ Wi-Fi settings ] , press the button.
7. Press the / buttons to choose [ Auto send images to computer ] , press the button.
NOTE
If [ Wi-Fi ] settings has [ Disable ] selected, change settings to [ Enable ] .
8. Press the / buttons to choose [ Auto send ] , press the button.
9. Press the / buttons to choose [ Enable ] , press the button.
10. Press the / buttons to choose [ OK ] , press the button.
11. Click [Start] ( 
), and then select [Control Panel].
12. Under [Network and Internet], click [View network status and tasks].
13. Click [Wireless Network Connection].
14. Press the / buttons to select the SSID that matches with the one shown in [SSID:], and then press the button. (See the SSID example below).
15. Click [Wireless Properties].
16. Click the [Security] tab.
17. Tick the [Show characters] checkbox.
18. On the [ Password ] screen, press the button.
19. Enter the password displayed in the [Network security key]. (See the password example below).
- For information on how to use the on-screen keyboard, see [On-Screen Keyboard].
- Press the button after the letters have been confirmed, before returning to the previous screen.
20. After the password has been entered, press the / buttons to choose [ OK ] , press the button.
21. Click [Cancel].
22. Click [Close].
23. Close [Network and Sharing Center].
24. Press the / buttons to choose [ OK ] , press the button. (This screen may or may not be displayed)
-
/ buttons to choose [ OK ] , press the button to go to the next step.
25. Press the / buttons to choose [ Auto setting ] , press the button.
- Press the / buttons to choose [ OK ] , press the button to go to the next step.
26. The computer name will appear. Confirm that the name displayed on the [ Pairing Setup ] screen is the same, press the button.
27. If the camera Nickname is displayed under [ Procedure for this screen ] , select camera and click on [ Pairing ].
28. Once pairing is complete, the [ Setup Complete ] window will appear, click [ OK ] .
29. The [ Waiting ] window will appear for Image Transfer Utility 2. To continue transfering images from the camera, stay on this screen and wait.
NOTE
To save images in a different folder, click on the computer icon to open [ Set Destination Folder ] window.
1. Choose menu > [Wireless communication settings] > [Wi-Fi settings] > [Auto send images to computer]. 2. Choose [ Image sending options ] .
3. In [Image sending options], specify the transfer conditions.
4. Turn the camera off. 1. Confirm that the Image Transfer Utility 2 window shows [ Waiting ] . 2. The images will automatically transfer to the computer once the camera has been turned on within range of the access point.
3. To confirm the transferred images, click [ Open Destination Folder ] .
- The images will now be automatically transferred to the computer everytime, once the camera is turned on within range of the access point. If auto-transfer does not start, restart the camera.
IMPORTANT
- When using auto image transfer, ensure that the battery pack has sufficient charge. Power saving on the camera is deactivated.
- Any images captured after auto image transfer are not sent to the computer then. They are sent automatically when the camera is restarted.
- If auto image transfer to a computer does not begin automatically, try restarting the camera.
NOTE
- To stop sending images automatically, choose [Auto send images to computer] > [Auto send] > [Disable].
- Once Image Transfer Utility 2 is installed, it will continue to work unless the software has been closed.
- Click on
of the Image Transfer Utility 2 screen, choose [ Quit ] , this will disable auto-transfer even when the camera is turned on. To Enable wireless transfer again, turn on Image Transfer Utility 2.
Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you are using.
 | •Entering characters Press the / / / buttons to choose the key of your desired character, and then press the button. |
 | •Moving the cursor Choose [  ] or [  ] and press the button.You can also move the cursor by turning the  ring. |
 | •Switching input modes Choose [  ], press the button to switch to capital letters.Choose [  ], press the button to switch to numbers or symbols. |
 | •Deleting characters Choose [  ] and press the button. The previous character will be deleted. |
 | •Confirming input After pressing the  button, press the / buttons to choose [OK], press the button. |