How do I print with the date (Camera Direct / PictBridge)
Solution
This section describes how to print directly by operating a Canon camera that is connected to the printer.
CAUTION
- To select items from the camera's [LCD monitor], press the button to the left, right, top, or bottom
, and then press the <FUNC./SET> button 
to specify the item (When using a Canon camera).
- Screens, menu listings, or the locations of buttons may differ depending on the camera model being used.
- These instructions show how to print one image on one sheet of paper as an example.
- Please refer to the user's manual enclosed in the package when using a camera of a manufacturer other than Canon.
1. Connect the camera to the printer and turn on the printer.
[SELPHY CP770]
[SELPHY CP760]
Connect the printer and camera with the interface cable that came with your camera. Turn on the printer.2. Press the camera's <Playback> (
) button.
) button.
3. Display an image to print on the [LCD monitor].
Make sure that the [SET] icon is displayed in the upper left corner of the [LCD monitor], and then press the camera's <FUNC./SET> (
) button.
) button.4. The screen for specifying the print settings appears.
Select [Date] for adding the date. Specify the number of prints.
Select [Paper Settings], and then press the camera's <FUNC./SET> () button.5. The screen for setting the paper size appears.
Select the paper size, then press the camera's <FUNC./SET> () button. In the image shown above, the [9 x 13cm] size is selected.
) button. In the image shown above, the [9 x 13cm] size is selected.6. The screen for setting the paper type appears.
Select the paper type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Default] is selected.
) button. In the image shown above, [Default] is selected.7. The layout (border) settings screen appears.
Select the layout type, and then press the camera's <FUNC./SET> () button. In the image shown above, [Bordered] is selected.
) button. In the image shown above, [Bordered] is selected.8. Return to the print setting screen.
Make sure that the settings are correct. Select [Print] and press the camera's <FUNC./SET> () button to start printing.NOTE
- The date imprint cannot be used when the [Index] print layout is used.
- The date imprint cannot be printed on card sized sheets using the [8-up] print layout.