If the Message <Set the correct paper.> Appears
16-Dec-2011
8200279800
Issue
The message <Set the correct paper.> appears on the display and printing is interrupted.
Cause and Solution
If the size of the paper in the paper drawer or stack bypass tray is different from that of the paper specified in <Drawer 1>, <Drawer 2>*, or <Stack Bypass Paper (Std.)> of the <Paper Settings> menu, the message <Set the correct paper.> appears on the display.
Check if the size of paper loaded in the paper drawers or stack bypass tray meets the paper setting specified in the machine. The settings to be checked vary depending on the function used.
*Only when the optional Paper Drawer (Paper Drawer 2) is attached.
When copying originals or receiving faxes, check the following:1. Paper loaded in the machine
2. The paper size specified in <Paper Settings> in <Additional Func.>
When printing from a computer, check the following:1. The paper size specified on the printer driver screen
2. Paper loaded in the machine
3. The paper size set in <Paper Settings> in <Additional Func.>
After checking the paper size, follow the procedures below according to your job.
1. Load correct paper into the paper drawer or stack bypass tray.
For instructions on how to load paper into the paper drawer, see "Loading Paper into the Paper Drawers." For instructions on how to load paper into the stack bypass tray, see "Loading Paper in the Stack Bypass Tray."2. Specify the paper size in <Drawer 1>, <Drawer 2>*, or <Stack Bypass Paper (Std.)> of <Paper Settings>.
For instructions on how to set the paper size and type, see "Setting Paper Size and Type."
*Only when the optional Paper Drawer (Paper Drawer 2) is attached.
NOTE
Use A4, LTR or LGL when printing a report.
1. Verify the paper size specified on the printer driver screen.
2. Load the paper in the same size specified on the printer driver screen.
For instructions on how to load paper into the paper drawer, see "Loading Paper into the Paper Drawers." For instructions on how to load paper into the stack bypass tray, see "Loading Paper in the Stack Bypass Tray."3. Specify the paper size in <Drawer 1>, <Drawer 2>*, or <Stack Bypass Paper (Std.)> of <Paper Settings>.
For instructions on how to set the paper size and type, see "Setting Paper Size and Type."
*Only when the optional Paper Drawer (Paper Drawer 2) is attached.