14-Nov-2016
0400283502
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.1.2 incorporates the following fix:
Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to ""Enable"", correction will not be applied.
Firmware Version 1.1.2 is for cameras with firmware up to Version 1.1.1. If the camera's firmware is already Version 1.1.2, it is not necessary to update the firmware.
When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
Q&A:
Preparations for a firmware update:
After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
The extracted folder contains the firmware (File name: 60D00112.FIR, File size: 11,601,212 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
(The following is the history of past firmware updates)
Q: Are the improvements from previous firmware versions included in Firmware Version 1.1.2?
A: Yes, the following improvements from the previous version are included:
(Previous) Version 1.1.1 improvements:
1. Fixes a phenomenon where the camera's serial number that is displayed in the shooting
information of the image does not display the correct serial number. *1)
2. Corrects errors in the Greek, Italian, and Portuguese menu screens.
*1) If the camera's serial number is 2147483648 or higher and the camera firmware is Version 1.1.0 or earlier, the images captured with the camera will be affected by the phenomenon listed in 1. above.
This phenomenon only affects the EOS 60D, and does not affect the EOS 60Da. Both of these cameras are equipped with the same firmware.
To obtain the serial number correctly in the shooting information of images that are already captured using the old firmware, we are preparing updates for Digital Photo Professional and ZoomBrowser EX / ImageBrowser applications.
Once the software updates are ready, we will make an announcement on our Web site.
(Previous) Version 1.1.0 improvements:
1. Fixes a phenomenon where the wireless built-in flash settings are reset to defaults when the battery is removed from the camera.
2. Fixes an intermittent phenomenon where image-rotation information is not recognized correctly when shooting with the camera in the vertical position depending on the timing of the shutter release.
(Previous) Version 1.0.9 improvements:
1. Changes the name of the feature called ""Art Filters"" to ""Creative Filters"" (which is used in markets other than Japan) in the Japanese version to make the terms consistent. (This change only applies to the Japanese version and does not apply to other language versions.)
2. Fixes a phenomenon where the camera may operate abnormally when it is set to Quick Mode AF during Live View shooting immediately after capturing an image with the C.Fn II-1 Long exposure noise reduction setting set to [2: On] and a shutter speed setting of 5 seconds or more.
3. Fixes a phenomenon where the camera may operate abnormally when after Live View shooting, the remote switch on the EOS Utility screen is pressed to immediately start movie-shooting. This phenomenon only occurs when the camera is connected to a compatible personal computer and the Remote Live View function of EOS Utility software is being used.
(Previous) Version 1.0.8 improvements:
1. Fixes a phenomenon where captured images may become overexposed when using the camera's built-in flash or an external Speedlite in combination with the lenses listed below.
a) EF300/4 L IS USM
b) EF28-135/3.5-5.6 IS USM
c) EF75-300/4-5.6 IS USM
d) EF100-400/4.5-5.6 L IS USM
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.